排煙罩因?yàn)榻?jīng)常與油煙接觸，不經常清理，會使排煙通道堵塞，不利于空氣流通，長時間的堵塞也會使機子出現不同毛病的損壞。那么排煙罩該如何清理呢？
    The smoke exhaust hood is often contacted with the fume and does not clean up often. It will block the passage of the smoke, which is not conducive to the circulation of the air. The long time blockage will also cause the damage to the machine. So how do you clean up the exhaust hood?
    1、擰開固定網罩的螺釘；將取下的過濾網罩放在中性洗滌劑的溫水中浸泡5-10分鐘；用軟的塑料刷子把過濾網孔隙中的塵垢清洗潔凈，再用干抹布擦干；按拆下前的姿態裝好過濾網罩；安裝好今后，檢查器具的油路是否順利和蝸殼上的密封圈是否能密封；請按說明書規則的周期進行清洗過濾網罩；高壓鍋蒸汽沖洗法、首要在高壓鍋么倒上涼水，然后將涼水燒沸，等到有蒸汽不斷排出的時分，將高壓鍋上的現壓閥拿下來，翻開排煙罩。這時用蒸汽水住對準旋轉扇葉，因?yàn)楦邿崴羝粩鄾_入扇葉等部件，油污水就會很快的流入廢油杯里了。

    unscrewing the screw of the fixed net cover; soak the removed filter cover in the warm water of the neutral detergent for 5-10 minutes; clean the dust in the pore of the filter net with a soft plastic brush and dry it with dry rag; install the filter screen according to the posture before dismantling; after installation, the oil path of the inspection apparatus is smooth and the worm is the worm. Whether the sealing ring on the shell can be sealed; please clean the screen mask according to the cycle of the instructions rules; the steam washing method of the high pressure pot, the first in the high pressure pot and the cold water, and then the cold water to boil, when the steam is continuously discharged, the pressure valve on the high pressure pot is taken down and the exhaust hood is opened. At this time, steam water is applied to the rotating fan blades, because the hot water continuously rushing into fans and other components, and the oil sewage will quickly flow into the waste oil cup.
    2、洗潔精、食醋浸泡法：首要預備一盆溫水，倒入5滴洗潔精和50毫升食醋，再將排煙罩的葉輪拆下浸泡20分鐘左右，用潔凈的抹布擦拭，其它的部位也用一樣的辦法來擦拭，這種辦法不但對人的皮膚沒有損害，并且也不會腐蝕排煙罩的，清洗后外表仍然會堅持原有的光澤！
     washing clean, vinegar soaking method: first prepare a pot of warm water, pour into 5 drops of detergent and 50 ml vinegar, and then remove the impeller of the exhaust hood for 20 minutes and soak for about 20 minutes, and wipe the other parts with the same way. This method not only has no damage to the skin, but also will not corrode the human skin. After removing the smoke hood, the appearance will still adhere to the original luster.

上一篇：風機噪音降噪方案
下一篇：風機，油煙凈化器中的核心部件