The popularity of smoke exhaust equipment promotes the development of smoke exhaust equipment technology, and makes the installation technology of smoke exhaust equipment better and better. However, the smoke exhaust pipe will inevitably be damaged in the installation process. The following is how to deal with the problem of smoke exhaust pipe damage by the relevant personnel of Jinan smoke exhaust pipe:

濟南排煙罩

Jinan smoke hood

如果可以在管道外使用專用密封膠進行修補，管道外表面鋁箔層損壞，但玻璃纖維保溫層沒有損壞，可以使用合格的鋁箔片對管道鋁箔表面進行修補。

If the special sealant can be used outside the pipeline for repair, and the aluminum foil layer on the external surface of the pipeline is damaged, but the glass fiber insulation layer is not damaged, the qualified aluminum foil can be used to repair the aluminum foil surface of the pipeline.

如果在安裝排煙設備時發現損壞已經達到玻璃纖維保溫層，可以將損壞的地方切除，根據切除的玻璃板的大小選擇另一塊完好的板進行切割。然后在周圍的接口處涂上修補膠和粘合劑，按照工藝規范進行密封。排煙設備正常工作時，應經常檢查，以免耽誤工作。

If it is found that the damage has reached the glass fiber insulation layer during the installation of smoke exhaust equipment, the damaged part can be removed, and another intact plate can be selected for cutting according to the size of the removed glass plate. Then, repair glue and adhesive are applied to the surrounding joints, and sealing is carried out according to the process specification. When the smoke exhaust equipment works normally, it should be checked frequently to avoid delaying the work.

只有正常運行的排煙設備才能為人類服務，這就需要及時檢查設備是否損壞。如果您想了解更多，您可以咨詢我們的排煙管公司，我們將為您服務!

Only the normal operation of the smoke exhaust equipment can serve human beings, which requires timely inspection of whether the equipment is damaged. If you want to know more, you can consult our exhaust pipe company, we will serve you!

排煙系統中輸送氣體的管道稱為風管，它將系統中的各種設備或部件連成一個整體。為了提高系統的經濟性，應合理選擇風道內的氣體流速，管道應短而直。風管通常由表面光滑的材料制成，如薄鋼板、聚氯乙烯板，有時也有混凝土、磚等材料。

The pipe conveying gas in smoke exhaust system is called air duct, which connects all kinds of equipment or components in the system as a whole. In order to improve the economy of the system, the gas flow rate in the air duct should be reasonably selected, and the pipeline should be short and straight. Air duct is usually made of smooth surface materials, such as steel sheet, PVC board, and sometimes concrete, brick and other materials.

為了防止空氣污染，當排放的空氣中有害物質的量超過排放標準時，需要用凈化設備處理，達到排放標準后排入大氣。凈化設備分為除塵器和有害氣體凈化裝置兩種。

In order to prevent air pollution, when the amount of harmful substances in the air exceeds the emission standard, it needs to be treated with purification equipment and discharged into the atmosphere after reaching the emission standard. Purification equipment is divided into two types: dust collector and harmful gas purification device.

標準直管在生產線上直接壓制成連體法蘭。非標準直管、彎頭、三通、四通、管件下料后，在單機設備上形成TDF法蘭。法蘭角直接沖壓成型，安裝時可在四個角夾緊。

The standard straight pipe is directly pressed into a connecting flange on the production line. TDF flange is formed on single equipment after cutting non-standard straight pipe, elbow, tee, cross and pipe fittings. The flange angle is directly formed by stamping, and can be clamped at four corners during installation.

以上就是對濟南排煙管道出現破損時解決方法的介紹，大家都清楚了嗎?相信通過本文的描述，你能夠?qū)ε艧煿艿烙幸欢ǖ恼J(rèn)識和了解，希望以上內容能幫助到你。另外，若你想要了解更多相關資訊，可以多多關注我們的網站動態。

The above is the introduction of the solution to the problem of Jinan exhaust pipe damage. Are you clear? I believe that through the description of this article, you can have a certain understanding and understanding of the exhaust pipe. I hope the above content can help you. In addition, if you want to know more about it, you can pay more attention to our website.