裝配式耐火隔熱一體化通風管道：由金屬層、隔熱層、耐火層等，通過自有工藝將材料集成為一體，形成的板材，異型件等尺寸根據圖紙要求工廠量販式定尺生產，運輸?shù)焦さ睾?，直接拼裝成型后，吊裝即可，產品完全可以滿足使用場合，行業規范規定的耐壓與耐火和隔熱極限要求。

Assembled fire-resistant and thermal insulation integrated ventilation duct: the metal layer, thermal insulation layer, fire-resistant layer, etc. are integrated into a whole through their own processes. The size of the formed plates, special-shaped pieces, etc. are manufactured by factory according to the drawings. After being transported to the site, they can be directly assembled and formed, and then hoisted. The products can fully meet the pressure resistance, fire resistance and thermal insulation limit requirements specified in the use occasions and industry specifications.

產品強度高，可滿足防排煙風管大于或等于3000帕，高壓場合要求使用標準（以報告為準）

The product has high strength, and can meet the requirements of smoke control and exhaust air duct of more than or equal to 3000 Pa, and the use standard for high-pressure occasions (subject to the report)

板材防火A1級報告，耐壓報告，綠色認證，耐火隔熱報告等齊全，可滿足復檢要求！

The panel fire protection A1 level report, pressure resistance report, green certification, fire resistance and heat insulation report are complete, which can meet the re inspection requirements!

耐火隔熱要求30分鐘，60分鐘，90分鐘，120分鐘，180分鐘，根據要求選用！

The fire resistance and heat insulation are required to be 30 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes, depending on the requirements!

用途范圍：學校，醫院，化工廠，高鐵，地鐵，機場，展館等

Scope of use: schools, hospitals, chemical plants, high-speed railways, subways, airports, exhibition halls, etc

另外，通風管道的應用途徑特別廣泛，其中在室外的應用也是非常多見的。

In addition, the application of ventilation ducts is particularly extensive, especially in outdoor applications.

所以，對于一些在室外使用的通風管道來說，一定要具備比較好的抗腐蝕性，同時市場上的通風管道設備也以金屬材質居多，那么，這些金屬材質的設備也需要具有比較好的抗氧化性。如果一些金屬設備非常容易氧化，隨著氧化的日益嚴重，也會加快管道的損壞。

Therefore, some ventilation pipes used outdoors must have good corrosion resistance. At the same time, most of the ventilation pipes and equipment on the market are made of metal materials. Therefore, these metal equipment also need to have good oxidation resistance. If some metal equipment is very easy to be oxidized, the pipeline damage will be accelerated with the increasingly serious oxidation.